PDA

توجه ! این یک نسخه آرشیو شده میباشد و در این حالت شما عکسی را مشاهده نمیکنید برای مشاهده کامل متن و عکسها بر روی لینک مقابل کلیک کنید : جدیدترین ورژن DVBViewer Pro



maklaren
12-07-2010, 03:13 PM
دوستان لطفا ورژن های مختلف این نرم افزار را اینجا قرار بدهند

maklaren
12-07-2010, 03:17 PM
دانلود نرم افزار DVBViewer.Pro.3.9.4.0

araz_2536
12-08-2010, 11:34 AM
DVBViewer.Pro.v4.5.0.0

[Only registered and activated users can see links]

Password : [Only registered and activated users can see links]

parhamp6
04-12-2011, 05:16 PM
[Only registered and activated users can see links]

fddd
12-06-2011, 11:05 PM
بدون شک بهترین برنامه برای تماشا کردن کانال ها میباشد سرعت عمل این برنامه برای تغییر کانال ها بسیار بالاست و به راحتی اجرا میشود
153

لینک دانلود

[Only registered and activated users can see links]

منبع soft98

03-25-2012, 03:44 PM
ورژن جدید این نرم افزار به همراه فیلم آموزشی نصب و تنظیمات کدک و کرک نرم افزار خدمت شما دوستان ارائه میگردد



[Only registered and activated users can see links]


تغییرات این ورژن

Changelog DVBViewer Pro 4.9.5.1 Hotfix
Fix: Taskbar problems with XP and Vista/Win 7 with Aero disabled.
Fix: Channel scanner: Under certain circumstances the in-depth search did not work.
Fix: Unicast Device: Fixed tuning problems with the Recording Service.
Fix: Installer: Fixed the warning message if the DVBViewer/Recording Service or DVBServer is running.
Fix: Installer: Fixed duplicate transponder lists for existing DVBViewer Pro installations.
Fix: Aero Snap: Fixed some more problems with Aero snap.
Fix: DVBViewer Downloader: Fixed the warning message if the DVBViewer/Recording Service or DVBServer is running.
Download DVB_Viewer.4.9.5.rar|server1 ([Only registered and activated users can see links] l)[Only registered and activated users can see links]

([Only registered and activated users can see links] l)

Download DVB_Viewer.4.9.5.rar|server2 ([Only registered and activated users can see links])[Only registered and activated users can see links]

([Only registered and activated users can see links] l)

Download DVB_Viewer.4.9.5.rar|server3[Only registered and activated users can see links]

([Only registered and activated users can see links] l)

Download DVB_Viewer.4.9.5.rar|server4[Only registered and activated users can see links] ([Only registered and activated users can see links] l)

alexses
05-05-2012, 11:12 PM
[Only registered and activated users can see links]

This is a silent install, no need to enter any keys or use any keygens/patches/cracks

Intall and enjoy the full pro version



[Only registered and activated users can see links]

www.gshare.ir
02-14-2013, 02:30 PM
DVBViewer Pro 4.9.5.0 + crack

[Only registered and activated users can see links]




[Only registered and activated users can see links]

BALDE
04-27-2013, 08:45 AM
داداش سزار اون سرور شیلتر این گزاشتم ([Only registered and activated users can see links] l)

[Only registered and activated users can see links]

Download DVB_Viewer.4.9.5.rar|server3



([Only registered and activated users can see links] l)

DjAmir
07-10-2013, 02:43 PM
دانلود نسخه جدید Dvb Viwer

[Only registered and activated users can see links]

تغییرات





General

Fix: Playback: Playback of m2ts files with the DVBSource Filter didn't work.Fix: Main Window: Zoom 75% fixed.Fix: OSD: The screen saver was not disabled for slide shows.Fix: Timeshift: Fixed problems with timeshift for some channels.Fix: OSD: Image files with an UNC path were not shown.Fix: Tweaker.ini: The OSD Enable Tweak was missing.
Change: Main Menu: Removed the Help entry.Change: Main Menu: Renamed the "Wiki" entry to “Online Help”.Change: Main Window: Auto Best Width defaults to enabled now.Fix: RecodingWindow: The timer status changes were not shown correctly.Change: RTSP Device: 127.0.0.1 was not included in the SSDP search for SAT>IP servers.Fix: Options Window: Fixed problems with missing labels on reopening this window.Change: Options/Input: Changed the behavior of the “Learn” button.Add: Recording Options: Added an option to record the Current Now/Next EIT EPG data stream.Fix: Unicast Device Setup Window: The buffer count could not be adjusted.Add: ActionIDs: Added ActionID 135 for Close Graph.Fix: VCR: If a changed PMT PID was detected while recording the recording was restarted in an endless loop.Fix: VCR: TS audio only recordings with more than one audio stream sometimes an audio stream was wrongly detected as PCR stream.Fix: PMT-Parser: If the Service ID was set to 0 it was wrongly detected as PID 16.Fix: PMT-Parser: The PMT parser used a wrong PID for non ATSC audio streams with the ID $81.Update: DVBSource filter 3.7.Channel Logos

It is now possible to assign a logo to a channel with the help of the "channellogos.ini" file. The DVBViewer first checks if an entry for a channel is found in this file. If it isn't found it tries the old method (guessing).The format of the channellogos.ini file is quite simple:


EPGChannelID]

c=[Channelname} (UTF-8 encoded)

logo=[LogoFilename]

The “c=” entry exists for an improved readability the program just ignores it.

If a logo can't be found or doesn't exist it is marked with

logo=-

This avoids repeating and failing the search over and over again.Recording Service

Fix: Service Options: The test button showed the XML answer of the request.Fix: Service Options: “Ignore local recording list” is now ignored if the RS support is deactivated.Change: Service Support: The MAC of the Recording Service PC (needed for WOL) is now updated on every DVBViewer start.Fix: Service Setup Wizard: Fixed problem with empty password.Fix: Service Options: Fixed problem with empty password.Fix: Fixed unnecessary memory consumption for downloading data from the RS.Hardware

Change: BDA Hardware Detection: The DVB-S2 flag is now set for unknown DVB-S Devices.Fix: Hardware Options: The display wasn't updated correctly if no hardware entries were present.Add: HardwareDB: Support for Technotrend TT-budget CT2-4500 CI and Technotrend TT-connect CT2-4650 CI.Fix: Hardware/Sundtek/HDHomerun:Added a signal strength query directly after tuning.Add: HardwareDB: Support for DVBSky S680, DVBSky S960 and DigitalDevices Cine S2 V6.5.Subtitles

Add: MPEG/Subtitles: Support for subtitles in MPEG files added.Fix: The “show subtitles automatically” option didn't work under certain circumstances.Fix:DVB Subtitle:Switching between different languages didn't work.Change:OSD Subtitle: The OSD subtitle display is now cleared on channel / subtitle stream changes.Change: Options/TTX Subtitle: Changed the default font size to 24 point.EPG

Change: EPG Parser: The EPG Parser doesn't delete CRLF in the description text anymore.Change: EPG Processing: The language tag of the EIT EPG is now ignored if only one language is present.Fix: EPG-Export to HTML: Fixed problems with non ANSI channel names.Change:EPG Window: Unnecessary updates of the details display removed.Add: EPG: Tweak to force EPG without character set information to be recognized as ISO6937 encoded.Fix: EPG-Parser: Fixed missing last character for UTF-8 encoded EPG.InternalTask Scheduler

Fix: The tasks were not created in the correct order.Fix: Fixed different defaults for the LeadTime setting.Fix: The “-i” command line parameter was not detected correctly.Fix: Running recordings are now deleted from the task list.Fix: Synchronizing the task list on DVBViewer start.Fix: Empty parameter didn't work.Fix: Timer with the same start time result now in only one entry in the task list.Streaming Playback

Add: Ability to use the LAV Source Filter. By adding a "lav_" before an URL the Lav Splitter will be used instead of the own Vod Filter. VOD Source Filter

Fix: Streaming Thread reading problem. Several Splitters tried to read "behind" a file which caused an endless loop inside the reading threadFix: Exception inside GetMediaType, if no PAMMediaType is providedFix: UserAgent changed to allow playback of HbbTV contentShaders

Fix: the Bilinear Hardware Filter is disabled if you use a resample filter. To do so you have to set the ManualResample variable inside the shader scriptAdd: Lanczos 3 and 12, Bicubic, resample shaderAdd: Several new Shader effects, like Old TV.Add: Stereo 3D Left/Right to Up/Down converter, which is required for several 3D glasses like Zeiss Cinemizer OLED.Change: Shaders have been renamed and sorted into Stereo, Effect and Resample categories.

persianoffline
10-02-2014, 01:53 PM
DVB ([Only registered and activated users can see links])Viewer5.3.1


Download ([Only registered and activated users can see links] Viewer5.3.1.rar%26directory%3DTV%2520Cards%26)

offline
12-23-2014, 02:54 PM
Changelog DVB ([Only registered and activated users can see links])Viewer Pro 5.3.2



•Add: Playback: While the seek bar slider in the control bar is dragged with the mouse DVB ([Only registered and activated users can see links])Viewer continuously shows the picture at the current position (only if a custom video renderer or overlay is used, not on DVD playback).


•Add: Playback: "Show pictures while the seek bar slider is dragged" tweak (see Tweaker.exe, default on). Switching it off lets DVB ([Only registered and activated users can see links])Viewer fall back to the seek bar handling of previous versions.


•Change: Playback: In case of video playback without DVB ([Only registered and activated users can see links])Viewer Filter (e.g. MKV or AVI) the "Fast Forward / Rewind" actions do not change the playback speed anymore (limited to a 0.25...2.00 range in forward direction), but perform fast consecutive forward and backward jumps, thus achieving a speed up to 32x in both direction. The playback speed can still be influenced via Menu -> Playback -> Play Rate or by assigning keys to the Speed Up / Down actions.


•Add: Playback: Fast Forward / Rewind is now also available by right-clicking the << and **** buttons in the control bar. Please note that the "Replace dynamic jumps by fast forward/rewind" tweak (see Tweaker.exe), that generally exchanges the assignment of the Fast Forward / Rewind and Jump Plus / Minus actions to UI elements, also applies to left/right-clicking the control bar buttons.


•Fix: Playback: Several seeking / position change issues, e.g. black screen on each position change with DVB ([Only registered and activated users can see links])Viewer Filter and (non-custom) EVR video renderer.


•Fix: Playback: Audio playback with the DVB ([Only registered and activated users can see links])Viewer Filter could not be re-started after seeking / jumping in pause mode (timeshift also affected).


•Add: Playback: .m4a and .ape added to the default audio file extensions.


•Fix: DVD Playback. After reaching the beginning of a title with fast rewind DVB ([Only registered and activated users can see links])Viewer didn't notice that the DVD navigator automatically switched to normal forward playback, which caused some confusion in the OSD and playback handling.


•Fix: Playback: Wrong handling of the "Options -> Movies -> Action playback end -> None" setting, causing failure of subsequent play / pause actions.


•Fix: Custom EVR: Measures against potential freezing and some audio/video sync problems (particularly when using the LAV Video Decoder).


•Change: DirectX Options: "VSync by Aero" option removed. It didn't prove to be useful.


•Add: DirectX Options: "Render late pictures" checkbox for EVR Custom Renderer (default off). It specifies whether the video renderer shall drop all pictures arriving too late (after their presentation time). Ticking this checkbox enables watching video that is decoded too slow due to high CPU load (e.g. HEVC UHDTV), but may let audio / video become asynchronous under certain circumstances.


•Fix: D3D Engine: Delayed OSD and video area repaint, unnecessary CPU/GPU load when no video was playing or no OSD was displayed.


•Fix: Main Window: Custom Renderer crash if the video display area was resized to zero. Now there is a minimum size of 160 x 90 pixel.


•Fix: Main Window: Heavy video flickering when the main window was resized (Windows 7 with Aero and Windows 8 not affected).


•Change: Main Window: Tool button icons in the control bar enlarged for better perceptibility.


•Add: Main Window: Tweak "Allow Main Window Aero Snap" (see Tweaker.exe). Allows the Windows Aero Snap function to enlarge the DVB ([Only registered and activated users can see links])Viewer main window when the mouse cursor touches the left, upper or right screen border while dragging the window title bar


Please note: Though several issues concerning the main window behavior in “Aero Snapped” state were fixed, malfunctioning in certain situations may still occur.

•Fix: DVB ([Only registered and activated users can see links])Viewer Windows: Several window handling related issues, particularly concerning the "Always on Top" main window setting, full screen on/off changes, dialog windows appearing behind other windows (making DVB ([Only registered and activated users can see links])Viewer almost inoperable), video content remaining visible in other windows after full screen off (Windows 7 without Aero) etc.


•Add: Main Window: "Bring open windows to the foreground" tweak (see Tweaker.exe). Decides if open DVB ([Only registered and activated users can see links])Viewer windows are brought to the foreground on full screen on/off: 0=never, 1=on full screen off, 2=on full screen on, 3=always. The default is 3.


•Fix: Picture in Picture: Closing PiP after using the swap function (swapping of the PiP and main channel by double-clicking the PiP area) in combination with certain plug-ins caused DVB ([Only registered and activated users can see links])Viewer to crash.


•Change: Subtitles: The Options -> EPG -> Subtitles -> Font selection now also takes effect on ATSC and ISDB subtitles (font name only, no other attributes).


•Change: Streaming: Streaming framework for VOD Source Filter reworked, VOD Source Filter updated to version 2.2.1.


•Add: HbbTV: "Use browser cache for HbbTV" tweak (see Tweaker.exe), switched on by default. Switching it off may be necessery to make ZDF HbbTV work.


•Fix: HbbTV: HbbTV prevented the update of UI elements (e.g. enabled/disabled state), thus causing wrong display or functions to be unavailable.


•Fix: HbbTV: An unnecessary stop command issued by broadcasters before delivering an MP4 stream could cause an unintended "stop timeshift?" warning despite live playback position.


•Change: EPG: Optimization of EPG data import / export and epg.dat reading / writing. The old 1.8 format (used till DVB ([Only registered and activated users can see links])Viewer 5.1) is not fully supported anymore, but can still be read (without some details like PDC, though). The DVB ([Only registered and activated users can see links])Viewer GE epg.dat can now be read, but without ANSI -> UTF-8 conversion.


•Fix: Data Base: A corrupted TVDatabase.db3 in the Configuration Folder\Database subdirectory could permanently disable all playback with theDVB ([Only registered and activated users can see links])Viewer Filter (including TV/Radio). Now .db3 files that are recognized as corrupted are automatically renamed to .err, and a new (empty) .db3 file is created.


•Fix: Playlist: The EndLess Playback option didn't work if the list contained only one item.


•Fix: Playlist: Saving the playlist via COM interface didn't work.


•Fix: Recorder: A prebooked program resp. "tune channel" timer didn't start in playback off state due to repeated access violations.


•Fix: Recorder: Recording AC3 Audio originating from a Hauppauge HD PVR didn't work.


•Add: Recorder: DVB ([Only registered and activated users can see links])Viewer now sends additional timer data (Event ID, PDC, lead and follow-up time) to the Recording Service if an EPG entry is scheduled for recording, so that the PDC (Programme Delivery Control) options can be set in the RS Web Interface for these timers.


•Change: Options Window: The window is now "non-modal", which means, the rest of DVB ([Only registered and activated users can see links])Viewer remains accessible while it is open.


•Change: Options Window: DVB ([Only registered and activated users can see links])Viewer does not urge users anymore to download and install the DirectX 9 runtime library when a custom video renderer is selected. The dialogue prompting for installation only appears after a shader is selected in the Settings -> Shader sub-menu, because this is the only purpose the runtime library is needed for.


•Add: API: Possibility to send command line parameters via the Recording Service to DVB ([Only registered and activated users can see links])Viewer Pro, thus enabling remote control of DVB ([Only registered and activated users can see links])Viewer clients. (RS API Wiki)


•Fix: RTSP/IPTV Device: Long channel switching delays caused by wrong RTP sequence counter handling of some SAT>IP servers.


•Fix: RTSP Device: Wrongly set thread priority ("lower than normal" instead of "highest") and potential buffer overflow.


•Fix: RTSP Device: The multicast TTL, intended to be 5, was wrongly set to 1, affecting the visibility of search requests across sub-net boundaries.


•Add: RTSP Device: Automatic detection of a changed server port (usually 554). Requires the "Automatic RTSP server IP:Port detection” tweak to be switched on (switched on by default, see Tweaker.exe).


•Add: Hardware: Automatic detection of correct Pilot Symbols setting if DVB ([Only registered and activated users can see links])-S2 channels are received with Devolo dLan Sat network tuners.


•Add: Hardware: Support for Hauppauge Colossus devices (similar to Hauppauge HD PVR).


•Fix: Hardware: Glitches in streams provided via hardware encoder based devices like Hauppauge PVR.


•Fix: Hardware: Under certain timing conditions tuning of an already tuned transponder (e. g. due to channel switching or another recording starting) could cause discontinuities in ongoing recordings of this transponder, if "Options -> Hardware -> Retune on missing stream..." was activated resp. set to a value greater than 0.


•Updated: Hardware Database

[Only registered and activated users can see links]

offline
12-23-2014, 03:00 PM
Transponder Lists for DVB ([Only registered and activated users can see links])Viewer



15.12.2014

offline
01-11-2015, 12:04 AM
DVB Viewer 5.3.2

اسکای استار 2
07-22-2015, 02:00 PM
DVBViewer Pro v5.4.0 Beta By Ahmad & Takki




[Only registered and activated users can see links]


[Only registered and activated users can see links]




Attentions ! Members and fans of DVBViewer.



Registration problem, caused much headache for all members. The best solution to cope with this problem, DVBViewer will be updated by the new version.

I created a new installation package for DVBViewer. New releases versions, I give the ability to update over the older version.

To gain this capability; 'DVBViewer v5.3.2' remove before the April package, and then install it.

Firstly; the installation folder "channel.dat file" and "the transponder folder" Backup.

Secondly; After uninstalling the application, "Start> Run>regedit" write.
Find>dvbviewer and search. Erase all results. Until there no results show up, do scan again.
This operation; DVBViewer, CMUV and CM&V should be made to one by one.

دانلود ([Only registered and activated users can see links])

اسکای استار 2
08-31-2015, 12:31 PM
دانلود نسخه جدید DVBViewer Pro SATVB ED 5.5.0
[Only registered and activated users can see links] تصاوير پيوست شده
[Only registered and activated users can see links]

اسکای استار 2
09-21-2015, 10:54 PM
5.5.2 from 14.09.2015
(copy from [Only registered and activated users can see links])

DVBViewer Pro 5.5.2
In Memoriam - Lars Gehre




Fix: HbbTV: HbbTV video playback did not work (since 5.5.1).

Fix: Stream Playback: Decoder / Renderer selection for streams in filter graph presets did not work.

Fix: Channel List Editor: Drag & Drop of channels into empty category folders did not work.

Fix: Channel List Editor: Wrong numbering of exported INI channel lists, so that the import function only read the first channel.

Add: Channel List Editor: “Delete Duplicates” item in the context menu. It deletes multiple entries for the same channel except the first one. Audio track sub-items are excluded. Different audio tracks of the same channel that are stored as separate channel entries (not as sub-items) remain untouched.

Add: TV / Radio Options: Possibility to select if the Popup Channel List shall appear on the right or left side of the main window.

Change: Main Window: The width of the mouse sensitive area that lets the Popup Channel List appear is scaled according to the window width.

Fix: Hardware: “Retune on missing stream” was repeated endlessly after Unicable reception failure, even when data arrived again.

Fix: Hardware: DiSEqC problem with latest Sundtek SkyTV driver.

Add: Hardware Options: Virtual RTSP (Sat>IP) network devices are displayed in red if no server IP is configured.

Change: Hardware Options: Adding a virtual RTSP network device, unicast network device or file device automatically opens the corresponding configuration dialog.

Updated: EPG Window: The file EPG_URLList.ini contains new and corrected EPG Window → Search → Internet popup menu items. In case of anDVBViewer Pro update installation please copy the file from the installation folder to the configuration folder if you want to use it

اسکای استار 2
02-13-2016, 07:29 AM
نرم افزار جدید برای DVB Wiewer به ورژن 1.32.0به تاریخ 12/2/2016


Description:
Recording Service


» Version: 1.32.0


» Size: 4878 KBytes

اسکای استار 2
03-06-2016, 09:21 PM
DVBViewer Pro



DVBViewer Pro 5.6.0
In Memoriam - Lars Gehre
Code:

Please note: Despite careful testing it cannot be excluded that DVBViewer Pro 5.6.0 still contains bugs that may damage the channel or favorites list, due to major changes in the channel and favorites handling. So please backup the fileschannels.dat and favourites.xml that are located in the configuration folder (see DVBViewer help menu) before using this version.

Channel and Favorites Editor
Added: Channel Editor: Multi-Selection of items for functions like Export, Delete or Drag & Drop. More than one Item can be selected by using the mouse plus the Ctrl or Shift key or the cursor keys plus Shift.
- In the channel list multi-selection is restricted to items belonging to the same level, so a selection cannot contain categories besides channels. Additionally the items (except root nodes) must be located in the same Video or Audio folder, so a selection cannot contain TV and Radio channels or items from different root folders.
- In the favorites list multi-selection is restricted to items of the same type, so a selection cannot contain categories and channels. However, a selection may contain channels from different levels, which means, channels outside and inside of categories.
Added: Channel Editor: “Select All” function in the context menu of the channel / favorites editor (Ctrl + A). It selects all siblings of the selected item with the same type on the same level.
Added: Channel Editor: Cut, Copy and Paste functions for moving or copying (multi-)selected channel list or favorite items to another location. The functions are available in the context menu of the channel / favorites editor or by using the standard keys Ctrl + X/C/V. Please note that DVBViewer does not use the standard Windows clipboard in this case, but a file in the Windows temp folder that even survives a reboot. Cut, Copy and Paste may serve the following purpose:
- Moving channels or categories within the channel list or favorites list by using Cut and Paste (as keyboard substitute for drag & drop).
- Copying channels or categories from the channel list to the favorites list (as keyboard substitute for drag & drop).
- Copying channels or favorites from or to other DVBViewer instances resp. installations on the same PC (particularly DVBViewer GE). Please note that favorites can only be copied to favorite lists, not to channel lists.
- Copying scan results from the TransEdit Scanner Window to the DVBViewer channel list by using “Copy to clipboard” in the Scanner Window context menu or Ctrl + C. TransEdit exports a mixture of channels from different transponders as category folders and a mixture of TV and Radio channels as root folder, which are inserted as such (including their content, of course) in the DVBViewer channel list. Only channels of the same type (TV or Radio) from the same transponder (frequency) are copied as pure channels.
Please note the following restrictions:
- The favorites editor actively prevents duplicates, so it does not make sense to use Copy and Paste within the favorites. After drag & drop or copy & paste of channels to the favorites a message box informs about how many of the selected channels were rejected because they are already present in the favorites list.
- Favorites only work if they are also present in the channel list (the favorites list is a subset of the channel list), so it is no good idea to use Cut and Paste for moving channels from the channel list to the favorites. It may result in data loss since it is not possible to to move/copy channels from the favorites back to the channel list.
Added: Channel Editor: “Sort Alphabetically” function in the context menu of the channel editor (Ctrl + O). Sorts the categories contained in the selected video/audio folder or the channels contained in the selected category folder(s) in alphabetical order. Please note that this kind of sorting changes the channel list permanently, unlike the sort functions in the channel list (without editor) that only influence how the channel list is displayed.
Added: Channel Editor: Context sensitive help function for the different editor pages. Please use the question mark tool button or F1 to open the corresponding Wiki page in your browser.
Change: Channel Editor: The auto-expand delay for drag & drop has been increased from 1 to 2 seconds.
Added: Channel Editor: “New” Button on the channel data page. It opens a pop-up menu allowing to select the tuner type for new channel data that can be entered on a page where all parameters are blank resp. set to zero.
Fix: Channel Editor: File names containing a dot were cut off at this position on export.
Change: Favorites Editor: New icons for the favorites indicating the tuner type (DVB-S/T/C) and if the channel is encrypted. Please note: A red cross indicates that no matching channel can be found for this favorite. Additionally it is disabled in the Favorite Menu and skipped on Favorite Plus/Minus. To make it work again such a favorite must be recreated, or the missing channel must be added again to the channel list.
The channel ID based assignment of favorites to channels is handled more strictly than before. A maximum of one deviating Channel ID attribute is accepted (and subsequently corrected). Otherwise the favorite is regarded as “not assignable”. However, a new internal favorite auto-update function continuously synchronizes the favorites with channel ID changes while DVBViewer is running. For example if a channel is renamed, the associated favorite is renamed in the same way. This measure avoids broken links between favorites and the corresponding channels.
Added: Favorites Editor: “Delete All” function in the context menu of the favorites editor (shortcut Ctrl + N). It deletes the whole favorites list after prompting for confirmation.
Reception Settings and Channel Search
Removed: Channel Editor: Satellite reception settings like DiSEqC, LOF and Tone cannot be set up per folder or channel anymore. They are only displayed as information on the channel data page. Please use the new Reception Settings page to configure reception of a satellite position (see below).
Added: Channel Editor: Clicking the gear wheel tool button opens a new Reception Settings page. The list on the left shows the available reception types (depending on the available tuner types). The list on the right shows the available transponder resp. frequency lists for the selected reception type. They are required for a channel search.
The Update Button updates both lists after changes in the hardware configuration, channel list or the transponder list directory. The “New DVB-S” Button creates a new satellite reception type item. It becomes permanent after selecting a transponder list for it and performing a channel search. The Transponder List Directory link opens an Explorer window showing the files in the transponder list directory.
The settings section allows to change the name of the selected transponder list and to set up DiSEqC and the LNB type for satellite reception. Clicking Apply updates the selected transponder list and all channels belonging to the selected reception type accordingly. Additionally Apply creates a permanent link between the reception type and the transponder list so it only has to be set up once for a channel search.
Please note that each satellite position is regarded as a separate reception type. Internally it is identified by its orbital position originating from the transponder list that has been used for scanning. However, if channel list entries are very old or have been created by a scan without transponder list, no orbital position may be assigned to them. They will let a “DVB-S 0°” item appear in the reception type list. Please select a matching transponder list for this item and click Apply to prevent issues that may result from missing orbital position assignments.
Change: Channel Search: The Channel Search Window has been integrated in the Channel Editor. It does not lock the DVBViewer UI anymore, that now remains accessible while a channel search is going on. The scanner engine and UI has been adopted from the DVBViewer GE scanner, entailing several fixes and updates, including new options, correct handling of DVB-T2 transponders, scanning for DVB-T2 MPLP sub-streams with appropriate hardware (Digital Devices, DVBSky) and the possibility to scan DVB IPTV lists (as for T-Entertain, INI and M3U format supported).
Please note that the new scanner engine does not support “blind scans” without transponder list anymore. A transponder list is now mandatory for scanning. If the Reception Settings Page does not offer a matching transponder list for your satellite position, or if it is outdated, please download an according INI file from one of the following web pages
[Only registered and activated users can see links]
[Only registered and activated users can see links]
[Only registered and activated users can see links]
and drag & drop it into the “Transponder Lists” field of the Reception Settings Page. This will store the file in the transponder list directory and make it available in the “Transponder Lists” list box.
Added: Channel Editor / Channel Search: “Scan this Frequency (F10)” item in the channel editor context menu. It is only available if the scanner page is visible, not scanning and a channel with a matching reception type is selected. The command sets the start transponder resp. frequency on the scanner page to the channel's transponder, thus enabling to scan it with “Scan Frequency”.
General Channel Handling
Fix/Change: Channel Auto Update: The code has been reworked. Several bugs / inconsistencies particularly concerning the recorder have been fixed, e. g. the missing check for a wrong teletext PID or the missing UI update (in the channel list and channel editor).after channel data changes.
The recorder's auto-update activities do not depend anymore on at least one of the “All Audio Tracks”, “DVB Subtitles” and “Auto-Split”.

[Only registered and activated users can see links]

[Only registered and activated users can see links]

[Only registered and activated users can see links]

[Only registered and activated users can see links]

اسکای استار 2
03-15-2016, 03:09 PM
جدیدترین نسخه نرم افزاری برای DVB Viewer pro به V5.6.0تاریخ 14/3/2016




DVBViewer Pro v5.6.0 TAKKI EDITION

اسکای استار 2
03-17-2016, 09:24 AM
جدیدترین نسخه نرم افزاری برای DVB Viewer pro به V5.6.1تاریخ 17/3/2016


DVBViewer Pro 5.6.1
In Memoriam - Lars Gehre

Demo

Quote:

Change Log DVBViewer Pro 5.6.1
Fix: Recorder: Recording all audio channels as TS did not work anymore (in version 5.6.0).
Fix: EVR / Custom EVR: Issues caused by wrong EVR Video Processor handling if the corresponding tweak was switched on. The default is now “off”.
Change: Channel Search: After a channel search the Channel Editor automatically selects and shows the first found new channel.
Fix: Channel Numbering: Under certain conditions the favorite number was not displayed correctly in “Favorites based OSD navigation” mode.
Fix: Channel Numbering: The status bar still displayed a zero-based channel number if the “One based channel and favorites numbering” tweak was switched on.
Fix: OSD: After opening the EPG details from the Mini EPG with OSD Green/Yellow and performing OSD Back the last state of the Mini EPG was not restored.
Fix: OSD: Assigning channel logos to channels failed in certain cases (particularly concerning audio track sub-entries).
Fix: OSD: Browsing left/right in the Mini EPG only worked for the current (played) channel, not after browsing up/down.
Added: Main Window: “Hide mouse cursor” tweak (see Tweaker.exe) specifying when the mouse cursor gets hidden in the video area: 0 = never, 1 = only in full screen mode (default), 2 = always (tweak already available in 5.6.0 release).
Added: Main Window: New menu item View → Windows Size → Source Resolution plus a corresponding action. It adjusts the size of the main window so that TV or a video is displayed in its original resolution. In case of anamorphic video (non-square pixels) DVBViewer preserves the aspect ratio and adjusts the window size either to the horizontal or to the vertical source resolution (depending on the tweak “Best window size by only changing the height”).

اسکای استار 2
07-12-2016, 06:55 AM
نرم افزار جدیدDVBViewer_setup_demo ورژن 5.6.4به تاریخ 12/7/2016


DVBViewer Pro 5.6.4





In Memoriam - Lars Gehre

Fix: Main Window: In case of new installations and installations in which no changes on Settings -> Options -> TV/Radio had been performed yet the "Channel Plus/Minus" and "Favourite Plus/Minus" buttons in the DVBViewer main window tool bar unintentionally opened the OSD EPG display ("Mini EPG"), requiring to press [Enter] for channel switching to take place.
Fix: Channel Editor: In case of DVB IPTV clicking Apply on the channel data page of the channel editor stored wrong data preventing further reception of the channel.
Fix: Channel Editor: A change of a satellite frequency on the channel data page of the channel editor did not adjust the LOF and 22 kHz signal settings accordingly.
Fix: HbbTV: Under certain circumstances redirections were not handled correctly yet.

اسکای استار 2
11-27-2017, 10:38 AM
DVBViewer_Recording_Service_v1.32.0_Cracked_Editio n